Safe Strip - 55 gallon

Safe Strip

Ecosafe Paint Remover

SAFE STRIP is an eco-friendly paint and resin solvent. It replaces hazardous solvents like methylene chloride, toluene, and benzene, ensuring safer cleanup and paint removal.

Add to quote

Product Description

SAFE STRIP is an environmentally conscious solution for paint and resin removal. SAFE STRIP serves as a safe alternative to hazardous solvents that are typically used for paint cleanup and removal like:

  • Methylene Chloride
  • Toluene
  • Benzene

SAFE STRIP has a significantly lower Inhalation Hazard Index compared to Methylene Chloride or MEK, and it ensures safer use in both commercial and industrial settings.

SAFE STRIP can be an effective solution for cured and uncured coating, being applied through immersion or a brush-on, rinse-off solvent.

Available to purchase in

  • 55 Gallon Drum
  • 5 Gallon Drum

Benefits

  • Biodegradable Solvent
  • Non-Flammable Solvent
  • Low-VOC emissions during use
  • One-step coatings removal
  • Comparable performance to MEK and Methylene Chloride
Paint Removal

Paint Removal

Applications

SAFE STRIP is suitable for all coatings including:

  • Two-Step high-solids epoxy
  • Polyurethane resins

This solvent also serves excellently in cleaning paint guns, gun-cleaning tanks with and/or ultrasonic or mechanical agitation.

It’s important to note for SAFE STRIP’s application, the reaction time depends on the paint or coating to be removed. To get the most out of your removal, SAFE STRIP can be safely heated up to 60 degrees Celsius.

SAFE STRIP can be recycled and reused multiple times. Special processes like vacuum distillation and decantation can be performed on spent material for soil separation, enabling solvent reusability.

Key Characteristics

Physical PropertyTypical Value
Boiling Point396° F @ 760 mmHg
ColourClear, Colourless
Flash Point, Tag Closed Cup190° F
Freezing Point-68° F
OdourSweet
Solubility in WaterComplete
Specific Gravity1.02
Vapour Density3
Vapour Pressure<0.3 mmHg @ 68° F
VOC Content968 gm/liter

Safety and Handling Precautions

SAFE STRIP is highly effective in paint removal, but potent enough to dissolve certain rubber and plastic materials:

  • Seals
  • Gaskets
  • Buckets
  • Bottles

Safety glasses and gloves are adequate precautions during handling of SAFE STRIP. Our recommendation is butyl rubber gloves for optimum protection. For instances of skin or eye contact, thoroughly wash with plenty of water.

While SAFE STRIP is combustible, ensure the temperature does not exceed 60 degrees Celsius when using it in a heated immersion tank. Use SAFE STRIP only in well-ventilated areas, away from excessive heat and open flames.

Please review the safety data sheet thoroughly before handling.

Safety Data Sheet

Related products